CYBERVENT
VMC System
Professional Guardian of Healthy Breathing
1
Our Products
CyberVent Series VMC
System
SmartVent Series Wall
Mountable AC
AI Series Air Purifier
Light Series Portable
Air Purifier
Storm Series Air
Humidifier
Based on PITSS heat exchange
multiplication technology, combed
with EBM fan and innovative air duct
design, it can provide a
comprehensive solution for indoor
formaldehyde, PM2.5, carbon
dioxide, bacterial viruses and other
air pollution, which can reduce
indoor energy consumption while
providing fresh oxygen and
ventilation. In addition, the
integration of HEPAStack
professional mixed air filtration, zone
control, whole house fragrance and
other optional functions, the VMC
system can further enhance its energy
conservation performance, and
comprehensively improve the indoor
environment quality.
Based on AirTurbo pressurized
purification technology, it can
form indoor strong positive
pressure environment without
complicated ducts and realize
whole house purification, which
can solve formaldehyde,
particulate matter and other
various pollution and prevent
outdoor dirty air from entering
the house as well. Intelligent
mixed air, end of electric
auxiliary heating and APP
control can not only be operated
conveniently, but also can
enhance its energy conservation
performance and extend the life
of filters.
Based on fully-sealed
professional tower structure,
combined with integrated air
duct design, it can achieve >
99.99% of the single purification
rate; different filters of HEPA
Stack filter technology can
purify various pollutants; H13
high-efficiency HEPA filter can
effectively capture ultra-fine
particles and the data far
exceeds the national standard;
Filter adaptive technology can
meet the renovation,
humidification, haze and other
different life requirements and
only needs to replace the filter,
one for all needs.
Based on pressurized
purification technology, it
can achieve double
purification efficiency with
double air inlet to create
exclusive personal clean
breathing area for cars,
personal office areas,
business trips and other
scenarios and it is small and
portable, having clean air
anytime and anywhere.
It has a water tank with large
capacity of 7000ml, and
humidification capacity can
reach 431ml / h, using patented
HydrClean airflow technology
and UVC sterilization
technology. Double purification
can achieve 99.7% effective
sterilization with has healthy
humidification, adding an
insurance for your health.
“We believe in the power of technology and are committed to
combining cutting-edge technology with professional products
to solve the complex problems of life with more simple
designs.”
------- AirProce
2
There are many imperceptible pollutants indoor.
Outdoor Gaseous Pollution
Automobile exhaust, rubbish
incineration, ozone and other outdoor
gases also aggravate indoor pollution.
Carbon Dioxide
Crowding or lack of air circulation can
easily lead to excessive carbon dioxide,
which is the main murderer of mental
discomfort, dizziness, drowsiness and
stuffiness.
Bacteria and Viruses
The pollution that is harmful but often easy
to ignore, the humid environment is very
easy to breed bacteria, and air conditioners
that are not cleaned for a long time are the
gathering place for bacteria and viruses.
Outdoor Solid Pollution
It is extremely difficult to clean the
haze, dust, and other solid pollutants
entering the room.
Formaldehyde, Benzene and Other
Decoration Pollution
Formaldehyde, benzene and other
decoration pollution with an incubation
period of up to 15 years are the hidden
killer at home.
Second-hand Smoke and Cooking Oil
Fumes
Smoking and cooking at home are
accompanied by a lot of second-hand
smoke and oil smoke, which are
hazardous to health.
Pollen, Dust Mites
Tiny pollen released by flowers and plants
in the air and mass of dust mites in the
deep layers of beds and sofas can easily
cause allergy symptoms such as rhinitis.
Various Odors
Kitchen, bathroom and other spaces often
produce various pollution, which can affect
the quality of life.
3
It is different from the traditional VMC, which only takes the heat exchange host as the core component and other equipment as spare parts. CyberVent
is a complete “system”, including heat exchange main unit, air-mixing filter, Electronic Distributor, low resistance Air Grille, intelligent controller and
Bluetooth sensor, and each module is designed to make CyberVent VMC system operate more efficiently and energy-saving, bringing unprecedented
intelligent-controlled fresh air purification experience.
Power symmetry, impedance symmetry and temperature symmetry of PITSS heat exchange multiplication technology provide fresh oxygen and
ventilation and enable significant reduction in energy loss. HEPAStack triple professional purification provides professional purification and supports
mixed air, making it possible to further reduce energy consumption. The zone control of Electronic Distributor allows you to choose different VMC
modes according to living habits and indoor temperature zone, which is not only energy efficient but also more comfortable. The four new VMC modes
of two-way flow, one-way flow, internal circulation and rapid purification helps you to deal with all indoor and outdoor pollution situation with ease.
The air outlet can be equipped with an optional fragrance module to customize the smell of the space. You can also customize more VMC usage modes
through the custom combination of these modules.
PITSS Heat Exchange
Multiplication Technology
Enhance whole house energy
conservation performance
Mixed Air Filtration
HEPAStack triple professional
purification
Four VMC Purification Modes
Deal with all pollution
Touch Screen Controller
Easy adjustment with one button
Zone Control
Independent control of each
temperature zone and high energy
efficiency
Whole House Fragrance
Customized home taste
4
CyberVent Series VMC System
One system solves the whole house air problem
CyberVent Series VMC System
Overview of Core Components
Air-Mixing Filter
Heat Exchange Main Unit
Electronic Air Distributor
HEPAStack triple professional purification
technology equipped with washable PreFilter, F7
PreFilter and H13 HEPA Filter provides
professional purifying effect. It also has mixing
valve to realize intelligent adjustment of air
intake ratio.
Equipped with two German EBM
forward-facing dual-inlet EC fans, it can provide
strong power and ERV/HRV full-size heat
exchange cores for up to 85% heat exchange
efficiency.
16-channel digital program-controlled air duct
interface reasonably guides the air volume,
transported to each area, and air duct up and
down mirror design is convenient for layout and
piping.
Bluetooth Sensor
Intelligent Controller
Air Grille
Used with intelligent controller, it can
detect indoor temperature, humidity,
carbon dioxide, PM2.5 and other data
and display them in real time on the
intelligent controller for easy checking.
4.0-inch touch intelligent controller has
many functions such as system air
volume and pressure adjustment, room
air volume setting, and has centralized
management of the entire system by the
controller with convenient interaction.
Optimized design of air ducts greatly
reduces the air loss of the outlets, which
is highly efficient and has low noise; the
creative addition of fragrance module
realizes the whole house fragrance.
5
Patented air ducts and full-size heat exchange cores
Thanks to the EC fan and ducts, we placed a full-size heat exchange core in the
product. The full-size heat exchange core has a wider lateral flow path, which
provides a wider airflow area and thus reduces the flow velocity and extends the time
of airflow in the core to improve the heat exchange efficiency.
Full heat exchange core with polymer material, heat exchange efficiency up to
85%
The whole machine is equipped with full heat exchange core as standard, in order to
cope with different climate characteristics, we provide professional customized
sensitive heat exchange core in order to obtain higher heat exchange efficiency.
PITSS Heat Exchange Multiplication Technology
Heat Exchange Main Unit
Hard-core heart, strong and large air volume, heat
exchange efficiency up to 85%
Heat exchange main unit is the heart of CyberVent VMC system,
which is not only the dynamic core but also the core of energy
recovery and recycling. In order to achieve efficient air exchange
while reducing energy consumption as much as possible, we
have specially developed three symmetrical systems (PITSS) for
power, impedance and temperature, which provides surging
power while reducing energy loss from the internal structure of
the unit, the docking method between the unit and the
subassembly, and the application design to achieve
unprecedented system energy saving. The mainframe adopts EPP
wrapped metal frame shell and is equipped with a special filter
element, all of which can make this powerful heart more durable
and long-lasting.
PITSS （Power Impedance Temperature Symmetry System）
Power symmetry, impedance symmetry and temperature symmetry of
heat exchange multiplication technology to build more energy-saving
and efficient heat exchange heart
1. Power symmetry
German forward-facing EC fan
We used two German EMB most advanced EC fans in the heat exchange main unit
without reservation. These two EC fans are not only of the same type but are also
digitally calibrated to ensure that the inlet and outlet air ducts are proportionally
powered. This fan is an electrical commutation forward-facing drum-type double inlet
type. In addition to high intelligence, high energy saving, high efficiency, long life, low
vibration and low noise of EC technology, the fan also has a unique horizontal double
inlet duct, which, together with the heat exchange horizontal duct, allows a fuller
utilization of the exchange area of the heat exchange core. The high speed of 2650 and
the full speed of 920 airflow provide the CyberVent system with an exceptionally strong
aerodynamic performance. Abundant performance can easily overcome unpredictable
resistance increases in engineering, providing a performance foundation for aerodynamic
balance of the system.
6
3. Temperature Symmetry
As today’s cooling and heating systems provide customers with zone temperature control, in order to reduce energy consumption in
the actual use, it often makes the entire house have different temperatures in different rooms, and the temperature differences become
even greater in a particular period of time. Such temperature differences obviously reduce the recovery of heat energy reuse.
Therefore, we designed an electronically controlled air distributor that can match the HVAC system to have unified temperature
planning to truly achieve temperature symmetry. We set the air inlet and return of the VMC system in the same or similar temperature
zone as far as possible, so that the air return temperature would be retained by the heat exchange core for temperature compensation
of the inlet air flow. In such a system, the role of heat exchange core to reduce the temperature difference between the air outlet and
the air return is played out as much as possible, thus improving the heat exchange efficiency very significantly.
Independent air inlet and return of
single area
Centralized air inlet and return of the
whole house
CyberVent with zone control has better energy saving performance than common VMC system with
centralized return air
Although the heat exchange materials have been upgraded in recent years, the ERV and HRV heat exchange cores we used are currently the world's most
advanced materials, and the negative laws of physics for heat exchange cores still exist, i.e., the higher the excess air volume, the lower the heat exchange
efficiency. In addition, too much airflow can cause more noise and unnecessary energy loss. So we recommend to use zone intelligent control, and the air
volume can be used where needed and close some unneeded areas, especially in some sleep, leave and other special scenarios. The total air volume of the
system is reduced, which can not only improve the heat exchange efficiency, save energy, improve the air temperature, but also greatly reduce the noise.
Air supply temperature
increases by
5 times
Heat exchange
efficiency increases by
5 times
Energy consumption
reduced by 5 times
60% noise reduction
2. Impedance Symmetry
Traditional VMC system only focuses on the symmetry of the duct impedance of the heat exchange main unit, without achieving complete system-level
matching, which makes the actual heat exchange efficiency far from the theoretical value. From the perspective of the whole system, we adjusted the air duct,
power compensation, duct path optimization, the final test conditioning of the whole equipment, and finally made the two-way airflow have the same air
volume in various gears, as far as possible to improve the heat exchange efficiency.
7
Filter Changing
Humanized side door design makes replacement and maintenance easier
F7 PreFilter
Pre filtrate the return air and supply air flow to
protect the heat exchange filter core and
prolong its service life.
H13 High-Efficiency HEPA Filter
When not installing the air-mixing filter, it is
recommended to install H13 high-efficiency
HEPA filter at the air inlet to improve the air
purification effect.
Heat Exchange Efficiency [%]
Noise [ db(A)]
Air volume VS Heat Exchange Efficiency
Air volume VS Noise
EPP Shell + Metal Frame Support
EPP wrapped metal frame, temperature and sound insulation, strong and durable
The heat exchange main unit adopts EPP wrapped metal frame shell, which is a classic design of
“soft wrapped hard”, so that the hard shell has strong performance of temperature insulation,
noise reduction and corrosion resistance. After installation, you may not even hear the sound of
operation, but this system can be used for your house for several decades.
8
The patented electronic distributor, directly connected to the heat
exchange main unit, delivers fresh air evenly to all areas. For CyberVent
intelligent control system, the air distributor is no longer just an
accessory, but an important part of the whole system. It is like blood
vessel of the human body, controlling every airflow line, and it receives
the strong airflow from the heat exchange main unit. Then it carries out
noise reduction with the reasonable flow guidance based on fluid
dynamics. It is delivered to each area by high-quality ducts with durable
EPP material, which is long-lasting and worry-free after installation.
16-channel independent numerical control flow duct interface
CyberVent has its own patented zone control technology with 16 air
ducts, 8 of which are air supply outlets and 8 are return air inlets. The
airflow of each air port can be precisely adjusted by the touch screen
installed in different temperature zones. And in the process of adjustment,
the air volume of other air outlets is not affected.
Extend symmetrical design to air outlets
In order to thoroughly implement the symmetrical design, we designed
the air outlet of the electronic distributor to be connected in pairs with air
outlets on the top and return air at the bottom, which allows the pair to
keep the length and number of corners as consistent as possible on the
tube path. It also avoids the interconnecting pipelines at the distributor
interface.
Direct connection of equipment, smaller installation area and lower
noise
The special interface of our electronic distributor can be directly
connected with the heat exchange main unit without pipe, which can
directly reduce the installation area. At the same time, the EPP material
used on electronic distributor has very excellent noise reduction
capability, and can directly reduce the noise by 9dB.
Airflow Distribution Patent
Electronic Distributor
Scientific design, powerful performance, smooth air supply and exhaust
9
Increase air volume utilization to a new level
Zone intelligent control brings more unexpected surprise
The subversive experience brought by zone control technology may surprise you. The accurate control of independent temperature zones
enables each area to have a very comfortable feeling and meet the personalized VMC needs of each living space. In addition, zone control
enables the VMC system to realize heat exchange in the same temperature zone to double the efficiency, further enhance energy consumption
performance and reduce noise at low speed. Matched with central air-conditioning and the zone technology of whole house underfloor
heating, it can realize the whole house green building standards.
Rated air flow of each room can be dynamically allocated to meet the changing
needs of life
Ordinary VMC system can only allocate the rated air floe in anticipation of the number
of occupants, and it cannot be changed after construction. However, with the change of
lifestyles, the number of occupants does not remain the same, and CyberVent
electronically controlled air distributor can redistribute the rated air flow at any time
according to actual demand to meet changing living needs.
The air pressure of each room can be adjusted to meet special needs
Positive and negative pressure ratio of the air supply and return air volume in the room
can be adjusted, and different rooms can be set as positive and negative pressure rooms
to meet special medical care needs.
One controller for one room, control is so simple
It can be divided into multiple control areas according to the needs, and each area can
be individually controlled to switch on and off and adjust the air volume without
affecting each other.
When you need it, it is at your hand
If a room has the need to remove pollution in a hurry, such as rapid removal of smoke
smell, hot pot smell, we can turn on the rapid purification mode, electronically
controlled air distributor can close the air outlet of other areas and have rapid
purification with the whole machine full air volume to the designated area.
Air inlet channel
Air outlet channel
10
Equipped with H13 HEPA high-efficiency filter
and HEPAStack quadruple filter, comparable
to the professional purification standards of
purifiers
Based with powerful HEPAStack filter
technology, triple filter design, equipped with
commonly used professional purifiers, it allows
outdoor air to be fully filtered before entering the
heat exchange main unit, until clean and fresh air
enters the room through the air outlet.
Intelligent air mixing technology
Unlock the mixed air and internal circulation mode to further save
energy and reduce consumption
The air mixing valve on the air-mixing filter can control the proportion of
fresh air introduction, and there are five gears that can be adjusted.In the
season with large temperature difference indoor and outdoor, the air
mixing valve can be properly opened, so that after professional filtration,
part of the indoor air and outdoor fresh air mix and neutralize the heat, and
participate in fresh air bidirectional flow cycle. When the proportion of
mixed air is adjusted to 0% fresh air, the outdoor fresh air no longer
participates in the equipment air circulation, and the VMC system now is
equivalent to a set of central air purification equipment.
Professional Filtration + Patented Air-Mixing Filter
Overturn the traditional filter design, give more possibilities for VMC system
The air-mixing filter redesigns the traditional VMC filter section to strengthen the purification
function, and the HEPAStack triple filter system provides professional purification effect. And it
supports mixed air installation, the VMC heat exchange system installed the filter allows part of the
indoor air to participate in the two-way flow circulation after professional filtration, quickly
neutralizing the temperature difference indoor and outdoor, further reducing energy consumption.
Intelligent indicator light reminds you of
the life of the filter element, and you will
know at a glance if the filter is due.
Support surface mounted and concealed
mounted, more convenient for maintenance:
Gypsum board ceiling surface mounted
Aluminum gusset ceiling surface
mounted
All kinds of ceiling concealed mounted
Washable primary filter cartridge
Effectively resist pollen, hair and other
large particle contaminants
F7 PreFilter
Efficient removal of PM2.5 and dust
H13 HEPA high-efficiency filter
Remove bacteria, viruses and other fine
particles, PM0.3 purification efficiency
up to 99.96%
11
4 VMC purification modes to customize your air
AirProce achieves multiple modes of VMC system by technological
innovation, and responds to various air pollution encountered in life with
more efficient and energy-saving solutions.
1. Bidirectional Flow Purification Mode
Whole house ventilation and purification, energy saving and consumption reduction
As the most commonly used mode of VMC, the bidirectional flow heat recovery mode can be a
long-term solution for various pollution problems such as indoor formaldehyde, allergen, virus and
carbon dioxide as well as exchange the energy between indoor air and outdoor air to achieve energy
conservation and emission reduction. In this mode, you can independently select the positive pressure
ratio of inlet air. For example, when the outdoor air is seriously polluted, it increases the positive pressure
ratio of air inlet to form a positive pressure environment indoors, so as to avoid the unfiltered intrusion of
outdoor dirty air into the room through door slots and window cracks.
2. One-way Mode
Solutions to resist the invasion of pollution and pursue more extreme cleanliness
As a rapid purification mode to deal with sudden indoor pollution, when serious indoor pollution source
such as cooking fumes, second-hand smoke and other human factors are generated, you can choose to
turn on the one-way flow return air mode to quickly exhaust the polluted air, and then resume the
bidirectional flow mode when the air quality improves. And vice versa, one-way flow mode can help you
deal with sudden air problems more efficiently.
12
3. Internal Circulation Mode
Each room is equipped with an air purifier
When there are dust storms, heavy haze, snowstorms and other extreme weather outside, the internal
circulation mode can have an isolated purification of indoor air from the outside world, as if each room
has a professional purifier, which can reduce the burden of the outdoor environment on the filter of the
VMC system, carrying out energy-saving and efficient filtration of indoor pollution in the whole house.
4. Single-zone Rapid Purification Mode
Make every effort to improve the air quality of single area
When there is sudden air pollution in one of the indoor areas, the system can cut the air volume of other
areas, then the full air volume will be used to change and purify only for that polluted area, and the
pollution can be fixed at a speed visible to the naked eye. For example, after smoking in the study, you
can turn on the rapid purification mode, and the system with 500+ airflow can refresh the air within 3 to
5 minutes.
13
Air butler is always with you
An intelligent control panel can be installed for each room. The panel can control the fresh air in that room
individually and become the air steward of that room. (Up to 5 control zones are assigned to 5 control
panels for the whole system)
One touch for all functions
Intelligent control panel realizes system air volume and
pressure adjustment, room air volume setting, and can
customize four purification modes, view outdoor
weather air and view system working condition.
Do you forget to turn
off the VMC when you
go out? You don't have
to worry anymore with
CyberVent smart
control panel. You can
check and control the
VMC in your home
anytime and anywhere
with mobile app.
Intelligent Control Panel
A fusion of technology and art
CyberVent intelligent control
panel adopts 4.0-inch color IPS
screen, equipped with capacitive
touch with touch millisecond
response, creating a smooth
touch. The concise atmospheric
appearance enhances the beauty
of the environment and shows the
taste of the whole home.
14
Lower resistance, lower noise, more airflow
The 100mm interface directly widens the 75 ducts airflow area, greatly
reducing the flow velocity. The centered dome stabilizes the airflow
path, while the end wind break hood breaks the airflow with low
resistance and squeezes the airflow into annular flow to blow out from
the air outlet, reducing the wind sensation.
The smell of home is within reach
Magnetic fragrance box is easy to change different fragrances.
Rotate left and right to adjust the concentration of fragrance.
Fragrance Air Grille
Perfect the module design and small air
outlet also has a big difference
The air outlet we designed has been optimized for fluid
dynamics, and the passing resistance reduced as much as
possible makes the loss of air volume be almost ignored.
In addition, the innovative whole house fragrance
function gives the air a soul, and the consistent elegant
industrial design is suitable for all kinds of home styles.
15
More Functions
Infinite airflow for home and commercial use
The modular design of CyberVent gives the product use more possibilities. It is not only for home use, but also for commercial use
with 1000m³/h+ fresh air volume. Only multiple systems need to be used in parallel to realize the use demand of 1000+ super large air
volume.
Multiple installation methods and more intuitive BIM drawings
Conventional, ceiling mounted
Standing cabinet mounted
Duplex mounted
More innovative technologies to discover
Professional installation team, after
sale without worry.
High-quality PE pipes are long-lasting,
reducing the frequency of
maintenance.
Multiple valves design to prevent
outdoor wind from backflow.
Automatic anti-frost function for
extreme cold weather use as usual.
Surface design of inlet air filter,
convenient for later maintenance.
Return air outlet G4 filter design to
protect duct cleaning.
Expandable design of air outlet,
suitable for all kinds of silencer hose.
High-density EPP material, safe and
environmentally friendly and durable.
Parallel Combination Design
Installation of VMC System
16
CV-280
CV-380
CV-520
Max Airflow
280m
3
/h
380m
3
/h
520m
3
/h
Enthalpy Recovery Ventilation
73%
71%
68%
Heat Recovery Ventilation
85%
83%
81%
ERV Core
PE temperature and humidity exchange
compensation
HRV Core
PS temperature exchange compensation
Exchange Core Feature
Washable, <3% leakage rate, anti-bacterial,
wide temperature range working conditions
Fan
German EBM-EC technology front roller type
forward-facing dual-inlet fan
Sensor
Dual-channel temperature, humidity, static
pressure sensor
Body Support Materials
Stainless steel
Body Isolation Materials
EPP
Compatibility Analysis
Used separately with an intelligent controller
Installation Method
Ceiling mounted/wall mounted
Air Duct Interface
160mm
Condensate Drain
8mm water pipe interface
Communication Interface
RS485 industrial communication standard
Working Voltage
220V, 60Hz
Power/Current
240W/1.2A
Heat Exchange Main Unit
The CyberVent heat exchange mainframe
uses two German EBM forward-facing
dual-inlet EC fans as the system power
source. They are equipped with ERV/HRV
full-size heat exchange cores. Two sets of
optional F7 prefilter and H13 high efficiency
filters are built-in, and the built-in
temperature and humidity sensor of air ducts
can calculate the heat exchange efficiency in
real time. The whole equipment uses stainless
steel frame and EPP and it has PITSS heat
exchange technology to achieve the most
ideal energy efficiency.
Technical Parameters
17
Air Supply Interface
75mm diameter wind pipe interface *8
Return Air Interface
75mm diameter wind pipe interface *8
Mainframe Air Supply and Return
Interface
160mm diameter wind pipe interface *2
Air Duct Cleaning Vent
1 on the left and 1 on the right
Drive Unit
Micro-step motor
Body Support Materials
ABS
Body Isolation Materials
EPP
Installation Method
Ceiling mounted/wall mounted
Compatibility Analysis
With intelligent control panel, it can adapt to
the third-party mainframe with zone control
function
Communication Interface
RS485 industrial communication standard
Working Voltage
220V, 60Hz
Power/Current
20W/0.2A
Mainframe Direction Interface
160mm
Indoor Air Inlet Interface
160mm
Outdoor Air Inlet Interface
160mm
Filter Specification
Washable pre/G4 pre/F7 pre/H13 high efficiency
filter
Air Mixer Adjustment
Step electric control regulation
Installation Method
Integrated ceiling/gypsum board surface
mounted, concealed mounted
Compatibility Analysis
With intelligent control panel, it can adapt to
third-party mainframe with filtration and mixed
air function
Body Isolation Materials
EPP/ABS
Communication Interface
RS485 industrial communication standard
Working Voltage
220V, 60Hz
Power/Current
20W/0.2A
Electronic Distributor
CyberVent has 16-channel air duct interfaces, each of
which with digitally adjustable air volume. The
supply and return air are compatible with 75mm
ducts. The supply and return air ducts are designed
with mirror up and down, making the ducts arranged
in pairs, which is easy for layout. Two air duct
cleaning windows are placed on the left and right
sides.
Technical Parameters
The CyberVent air-mixing filter has HEPAStack
technology triple filtration technology with
professional filtration capabilities, including a
washable prefilter, F7 prefilter and H13 high
efficiency filter. It is also equipped with a full-size
160mm interface mixer, which adjusts indoor and
outdoor air intake ratio so that the system can achieve
up to 4 purification modes.
Air-Mixing Filter
Technical Parameters
18
Max Number of Installations
5
Screen Size
4.1 inch
Resolution
720*720 IPS
Man-Machine Interaction
Capacitive touch
Shell Material
ABS
Color Optional
Bright moon silver
Installation Method
86 Box
Compatibility Analysis
Individual control of all devices in the
CyberVent system
Wireless Interface
WIFI
Upgrade Mode
Remote OTA
Communication Interface
RS485 industrial communication standard
Number of Installation
1:1 pairing with intelligent control panel
Sensor Type
Temperature, humidity, CO
2
, PM2.5
Shell Material
ABS
Installation Method
Three hole AC power supply
Compatibility Analysis
Compatible with CyberVent intelligent control
panel only
Wireless Interface
WIFI
Upgrade Mode
Remote OTA
Communication Interface
Bluetooth
Air Duct Interface
100mm diameter wind pipe interface
Hole Size
125mm
Exterior Shell Material
Anodized aluminum sandblasting process
Color Optional
Bright moon silver/dark iron black
Installation Method
No tool for quick connection
Hydraulic Resistance
5pa
Compatibility Analysis
100mm air duct interface and 75mm air duct
need to be switched
Air Inlet Fragrance Capacity
Air supply outlet equipped with 15ml special
fragrance
Return Air Outlet Filter Level
Return air outlet with G4 duct filter
Intelligent Controller
Bluetooth Sensor
Air Grille
CyberVent intelligent controller can realize system air
volume and pressure adjustment, room air volume
setting, customizable four VMC purification modes,
check outdoor weather and air quality, and system
working condition. One panel can solve multiple
needs. The concise atmospheric appearance enhances
the beauty of the environment and shows the taste of
the whole home.
Technical Parameters
CyberVent sensors can be paired with intelligent
controllers to detect air quality in the area.
Data includes temperature, humidity, CO
2
concentration, and PM2.5 concentration. The sensor
plugs directly into a three-hole socket and connects
via Bluetooth without installation.
Technical Parameters
Technical Parameters
CyberVent air grille after hydrodynamic optimization
makes the air loss be almost negligible. In addition,
the innovative whole house fragrance function gives
the air a soul, and the consistent elegant industrial
design is suitable for all kinds of home styles.
Technology, Smart Clean Life
